HAYNES® 75 Alloy

A leading distributor for quality Corrosion-resistant & High-temperature Alloys. 
​Located in Perth, Western Australia. We ship worldwide from stock or indent order.

HAYNES® 75 Alloy

HAYNES® 75 alloy (UNS N06075) is a solution-strengthened nickel-chromium alloy with moderate strength to 1200°F (650°C). It is principally used in low stress elevated temperature application requiring reasonable oxidation resistance, and is approximately equivalent to alloy 600 in performance. Alloy 75 is used in a number of fabricated part applications in the gas turbine and aerospace industries in Europe, and is also employed in general industrial heating uses. The alloy is readily formed and fabricated using conventional techniques. 

Corrosion-resistant and High-temperature alloys from Haynes International.

Specialty Metals supply all manner of Exotic Alloys from Haynes International.

Corrosion-resistant alloys such as HASTELLOY® B-3® alloy HASTELLOY® C-4 alloy HASTELLOY® C-22® alloy, HASTELLOY® C-22HS® alloy,  HASTELLOY® C-276 alloy,  HASTELLOY® C-2000® alloy, HASTELLOY® G-30® alloy, HASTELLOY® G-35® alloy, 
​HASTELLOY® HYBRID-BC1® alloy, HASTELLOY® N alloy, ULTIMET® alloy

High-temperature alloys such as HAYNES® 25 alloy, HAYNES® 75 alloy, HAYNES® 188 alloy, HAYNES® 214® alloy, HAYNES® 230® alloy,
HAYNES® 242® alloy, HAYNES® 263 alloy, HAYNES® 282® alloy, HAYNES® 556® alloy, HAYNES® 617 alloy, HAYNES® 625 alloy,
HAYNES® 625SQ®alloy, HAYNES® 718 alloy, HAYNES® HR-120® alloy, HAYNES® HR-160® alloy, HAYNES® HR-224® alloy, HAYNES® HR-235® alloy, MULTIMET® alloy HAYNES® NS-163® alloy, HAYNES® R-41 alloy, HASTELLOY® S alloy, HASTELLOY® W alloy, HAYNES® Waspaloy alloy,
HASTELLOY® X alloy, HAYNES® X-750 alloy

We have full traceability and supply our Material Certs with every order.
All trademarks on this page are registered trademarks of Haynes International.
Please share this page if you find it interesting or helpful.
See our blog or Titanium page for more Titanium information.

See our blog or Stainless page for more Stainless information.

See our blog or Exotic page for more Exotic information.


​​Specialty Metals' management system is certified to  
DNV ISO 9001, ISO 14001 & ISO 45001.

Need quality? We get it!

Specialty Metals are members of the following great like minded organisations.

Australian Defence Alliance

Australian-Defence-Alliance
The Australian Defence Alliance is Australia’s largest independent, professional advocacy body representing the policy and strategic governance needs of Small-to-Medium Enterprise (SME) businesses in the defence and dual-use industries.

​ Australian Stainless Steel Development Association (ASSDA)

ASSDA-Member
ASSDA is a non-profit industry group that has been developing a strong and vibrant stainless steel industry in Australia since 1992.

Henderson Alliance

Henderson-Alliance
​​The Henderson Alliance has been established by a group of progressive small & medium enterprises (SMEs) to support a higher level of small business participation in emerging defence industry contracts in Western Australia.

WA DEFENCE REVIEW

WA-Defence-Review
​Established in 2017, WA DEFENCE REVIEW set an important historical precedent by launching the first West Australian-based platform to support Australia’s defence sector across the spectrum of politics, government, defence, industry and academia.
You can also find us on social media sites below.

Specialty Metals - Need Metal? We get it!

Please share our homepage with your friends and colleagues today.
While we make every effort to provide correct information available to us please note that all information within this website is offered as general information for reference only.
Specialty Metals takes no responsibility for any errors within or does not offer any warranty or claim rising from information offered on or from this website.
Copyright © Specialty Metals 2018