Archives

refine news by:

  • 16 / 09 / 2022

    Invar Alloy

    Invar® (UNS K93600) is a unique nickel-iron controlled expansion alloy. With a composition of 36% nominal nickel and the balance Iron, Invar Alloy has the lowest thermal expansion of any known alloy. Another key fact...

    VIEW POST
  • 01 / 09 / 2020

    2205 ​Super Duplex Stainless Steel

    2205 is a duplex (austenitic-ferritic) stainless steel containing about 40 – 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304...

    VIEW POST
  • 01 / 09 / 2020

    2507 ​Super Duplex Stainless Steel

    Super Duplex 2507 has excellent corrosion resistance to a wide variety of media, with outstanding resistance to pitting and crevice corrosion in seawater and other chloride containing environments, with Critical Pitting ...

    VIEW POST
  • 01 / 09 / 2020

    Zeron® 100 ​Super Duplex Stainless Steel

    Super Duplex Zeron® 100 has excellent corrosion resistance to a wide variety of media, with outstanding resistance to pitting and crevice corrosion in seawater and other chloride containing environments, with Critical P...

    VIEW POST
  • 01 / 09 / 2020

    Ferralium® F255 ​Super Duplex Stainless Steel

    FERRALIUM® 255 is a super duplex alloy with a high strength to weight ratio with superior abrasion and cavitation resistance. Resistance to chloride SCC, as well as crevice corrosion and pitting. Good ductility with a h...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® B-3® alloy

    HASTELLOY® B-3® alloy (UNS N10675) exhibits extremely high resistance to pure hydrochloric, hydrobromic, and sulfuric acids. Furthermore, it has greatly improved structural stability compared with previous B-type alloy...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® C-276® alloy

    HASTELLOY® C-276 alloy (UNS N10276) was the first wrought, nickel-chromium- molybdenum material to alleviate concerns over welding (by virtue of extremely low carbon and silicon contents). As such, it was widely accepte...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® C-22® alloy

    HASTELLOY® C-22® alloy (UNS N06022) is one of the well-known and well-proven nickel-chromium-molybdenum materials, the chief attributes of which are resistance to both oxidizing and non-oxidizing chemicals, and protect...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® C-22HS® alloy

    HASTELLOY® C-22HS® alloy is the premier nickel-chromium-molybdenum, corrosion-resistant material for oil and gas industry use. Cold working of the alloy at levels between 30 and 65% result in high room temperature yiel...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® G-30® alloy

    HASTELLOY® G-30® alloy (UNS # N06030) is a nickel-chromium-iron material highly resistant to “wet process” phosphoric acid (P2O5). P2O5 is one of the most important industrial chemicals, being the primary source of...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® G-35® alloy

    HASTELLOY® G-35® alloy (UNS N06035) was designed to resist “wet process” phosphoric acid (P2O5), which is used in the production of fertilizers. Tests in real-world solutions indicate that G-35 alloy is far superio...

    VIEW POST
  • 01 / 09 / 2020

    HASTELLOY® HYBRID-BC1® Alloy

    HASTELLOY® HYBRID-BC1® (UNS N10362) alloy possesses much higher resistance to hydrochloric and sulfuric acids than the nickel-chromium-molybdenum (C-type) alloys, and can tolerate the presence of oxidizing species. The...

    VIEW POST
  • 01 / 09 / 2020

    ULTIMET®alloy

    ULTIMET® alloy (UNS R31233) provides a unique blend of properties. From a wear standpoint, it behaves like the STELLITE® alloys with lower carbon contents. From a corrosion standpoint, it possesses many of the attribut...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®25 alloy

    HAYNES® 25 alloy (UNS R30605) is a cobalt-nickel- chromium-tungsten alloy that combines excellent high-temperature strength with good resistance to oxidizing environments up to 1800°F (980°C) for prolonged exposures, ...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®C-4 alloy

    HASTELLOY® C-4 alloy (UNS N06455) is the most (micro-structurally) stable of the widely used nickel-chromium-molybdenum materials, which are well known for their resistance to many aggressive chemicals, in particular hy...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®75 alloy

    HAYNES® 75 alloy (UNS N06075) is a solution-strengthened nickel-chromium alloy with moderate strength to 1200 °F (650 °C)....

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®188 alloy

    HAYNES® 188 alloy (UNS R30188) is a cobalt-nickel-chromium-tungsten alloy that combines excellent high-temperature strength with very good resistance to oxidizing environments up to 2000°F (1095°C) for prolonged expos...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®214 alloy

    HAYNES® 214® alloy (UNS N07214) is a nickel - chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing fo...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®230 alloy

    HAYNES® 230® (UNS N06230) alloy is a nickel-chromium-tungsten-molybdenum alloy that combines excellent high-temperature strength, outstanding resistance to oxidizing environments up to 2100°F (1149°C) for prolonged e...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®233 alloy

    HAYNES® 233™ alloy is a new Ni-Co-Cr-Mo-Al alloy that offers excellent oxidation resistance at temperatures up to 2100°F (1149°C) or higher coupled with superior creep strength - a combination of properties never b...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®242 alloy

    HAYNES® 242® alloy (UNS N10242) is an age-hardenable nickel-molybdenum chromium alloy which derives its strength from a long-range ordering reaction upon aging. It has tensile and creep strength properties up to 1300°...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®244 alloy

    HAYNES® 244® Alloy offers a higher maximum use temperature than other low thermal expansion alloys currently available, including a 100-200°F (55-110°C) improvement over HAYNES® 242® alloy. The alloy is age-hardena...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®263 alloy

    HAYNES® 263 alloy (UNS N07263) is an age-hardenable nickel-cobalt-chromium-molybdenum alloy designed specifically to combine good age-hardened strength properties with excellent fabrication characteristics in the anneal...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®282 alloy

    HAYNES® 282® alloy (UNS N07208) is a, wrought, gamma-prime strengthened superalloy developed for high temperature structural applications, especially those in aero and industrial gas turbine engines. It possesses a uni...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®556 alloy

    HAYNES® 556® alloy (UNS R30556) is an iron-nickel-chromium-cobalt alloy that combines effective resistance to sulfidizing, carburizing and chlorine-bearing environments at high temperatures with good oxidation resistan...

    VIEW POST
  • 01 / 09 / 2020

    HAYNES®625 alloy

    HAYNES® 625 alloy (UNS N06625) is a nickel- chromium-molybdenum alloy with excellent strength from room temperature up to about 1500°F (816°C). At higher temperatures, its strength is generally lower than that of othe...

    VIEW POST
  • 27 / 05 / 2020

    AWS A5.22 E71T1-1

    ...

    VIEW POST
  • 25 / 05 / 2020

    AISI 304 / 304L

    AISI 304 / 304L (UNS S30400 / UNS S30403) is a general purpose 18/8 stainless steel with good strength and excellent corrosion resistance. Used for food processing, architectural trim, brewing and oil refinery equipment....

    VIEW POST
  • 25 / 05 / 2020

    AISI 316 / 316L

    AISI 316 / 316L (UNS S31600 / UNS S31603) is an 18/8 austenitic stainless steel enhanced with an addition of 2.5% Molybdenum, to provide superior corrosion resistance to type 304 stainless steel....

    VIEW POST
  • 27 / 02 / 2020

    AISI 310

    AISI 310 (UNS S31000) is a medium carbon austenitic stainless steel, for high temperature applications such as furnace parts and heat treatment equipment....

    VIEW POST
  • 27 / 02 / 2020

    ALLOY X-750

    Alloy X-750 (UNS N07750) alloy is an age-hardenable, nickel-base superalloy with a very good strength at temperatures up to about 1600°F (870°C). It is widely used as a wrought material for forged and fabricated parts ...

    VIEW POST
  • 21 / 02 / 2020

    AISI 420

    AISI 420 (UNS S42000) is a martensitic stainless steel with 12% Chromium  which is sufficient to give good corrosive resistance properties. It’s best corrosive resistance is when hardened and surface is ground or poli...

    VIEW POST
  • 21 / 02 / 2020

    AISI 410

    AISI 410 (UNS S4100)...

    VIEW POST
  • 21 / 02 / 2020

    Nitronic 50®

    Nitronic 50® (UNS S20910) is a high strength and good corrosion resistant austenitic stainless steel. It has nearly double the yield strength of 304 and 316 stainless steel and has better corrosion resistance than 317L ...

    VIEW POST
  • 21 / 02 / 2020

    Nitronic 60®

    Nitronic 60® (UNS S21800) is known for its excellent galling resistance, even at elevated temperatures. The additions of 4% silicon and 8% manganese inhibit wear, galling, and fretting. It is commonly used for various f...

    VIEW POST
  • 21 / 02 / 2020

    630 (17-4 PH) (UNS S17400)

    630 (17-4 PH) (UNS S17400) is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 6...

    VIEW POST
  • 21 / 02 / 2020

    70/30 Copper Nickel Alloy

    70/30 Copper Nickel Alloy (UNS 71500) is a 70% copper, 30% nickel alloy with additions of iron and manganese. These elemental additions make it somewhat more resistant to corrosion and erosion and with slightly improved...

    VIEW POST
  • 21 / 02 / 2020

    90/10 Copper Nickel Alloy

    90/10 Copper Nickel Alloy (UNS C70600) offers superior resistance to general corrosion and marine water attacks. It resists corrosion by fast moving water. It has nominal temperature coefficient of electric resistance. A...

    VIEW POST
  • 21 / 02 / 2020

    HAYNES® 625SQ® alloy

    HAYNES® 625SQ® alloy (UNS N06626) is a solid-solution strengthened superalloy. It is a modification of HAYNES® 625 alloy developed to enhance resistance to fatigue at temperatures up to approximately 1200°F (649°C)....

    VIEW POST
  • 20 / 02 / 2020

    Alloy 201

    Alloy 201 (UNS N02201) is the low-carbon version of Nickel 200.It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F (315°C)....

    VIEW POST
  • 20 / 02 / 2020

    Alloy 200

    Alloy 200 (UNS N02200) is commercially pure (99.6%) wrought nickel. It has good mechanical properties and excellent resistance to many corrosive environments....

    VIEW POST
  • 20 / 02 / 2020

    Alloy C276

    Alloy C276 (UNS N10276) is the alloy for outstanding performance in a range of aggressive environments. It is resistant to strong oxidizing chlorides, reducing acids, hot seawater and brine solutions. Alloy C276 is one o...

    VIEW POST
  • 19 / 02 / 2020

    Alloy 718

    Alloy 718 (UNS N07718) is a high-strength, nickel-based superalloy made for long-term use in temperatures ranging from cryogenic up to 1200°F. The alloy is readily fabricated and may be welded in either the annealed or ...

    VIEW POST
  • 19 / 02 / 2020

    Alloy 625

    Alloy 625 (UNS N06625) is a nickel-chromium alloy which gains its stiffening effect through molybdenum and niobium additions, therefore eliminating the need for this alloy to be aged. It has superior resistance to a wide...

    VIEW POST
  • 19 / 02 / 2020

    Grade 4 Titanium

    Grade 4 Titanium (UNS R50700) is “unalloyed” titanium offering improved strength, moderate ductility.The material is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reducing...

    VIEW POST
  • 19 / 02 / 2020

    Alloy 601

    Alloy 601 (UNS N06601) is a nickel-chromium alloy, that is highly resistant to oxidation through 2200°F. 601 alloy develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. The al...

    VIEW POST
  • 19 / 02 / 2020

    Alloy 600

    Alloy 600 (UNS N06600)is a nickel-base alloy with excellent carburization, and good oxidation resistance at elevated temperatures.The alloy has long been used in the heat treating industry for many of the same applicatio...

    VIEW POST
  • 19 / 02 / 2020

    Alloy 400

    Alloy 400 (UNS N04400) is a ductile nickel-copper alloy with resistance to a wide range of corrosive environments.The alloy has excellent resistance to sea or brackish water under high-velocity conditions. Alloy 400 is o...

    VIEW POST
  • 19 / 02 / 2020

    Alloy K-500

    Alloy K-500 (UNS N05500) is a nickel-copper alloy. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base and age hardening....

    VIEW POST
  • 18 / 02 / 2020

    Grade 23 Titanium

    Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitial (ELI). The wrought material i...

    VIEW POST
  • 18 / 02 / 2020

    Grade 12 Titanium

    Grade 12 Titanium (UNS R53400) is lightly alloyed near-alpha alloy offering improved strength at elevated temperatures and optimum ASME Code design allowables. The material is readily weldable, and has superior crevice c...

    VIEW POST
  • 18 / 02 / 2020

    Grade 7 Titanium

    Grade 7 Titanium (UNS R52400) with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and whe...

    VIEW POST
  • 18 / 02 / 2020

    Grade 5 Titanium

    Grade 5 Titanium UNS (R56400)Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys.The alloy is castable and is utilized "as cast" in spo...

    VIEW POST
  • 18 / 02 / 2020

    Grade 3 Titanium

    Grade 3 Titanium UNS (R50550) is “unalloyed” titanium offering improved strength,moderate ductility. The material is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reduci...

    VIEW POST
  • 17 / 02 / 2020

    Grade 2 Titanium

    Grade 2 Titanium UNS (R50400) is “unalloyed” titanium offering an excellent balance of strength and ductility....

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® 718 alloy

    HAYNES® 718 alloy (UNS N07718) is an age-hardenable nickel-iron-chromium-niobium (columbium)-molybdenum-titanium-aluminum alloy designed to combine excellent strength with good fabrication characteristics in the anneale...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® HR-120® alloy

    HAYNES® HR-120® (UNS N08120) alloy is a solid-solution-strengthened heat-resistant alloy that provides excellent strength at elevated temperature combined with very good resistance to carburizing and sulfidizing enviro...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® HR-160® alloy

    HAYNES® HR-160® (UNS N12160) alloy is a solid-solution-strengthened nickel-cobalt-chromium-silicon alloy with outstanding resistance to various forms of hightemperature corrosion attack. HR-160® alloy has excellent re...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® HR-224® alloy

    Haynes International, Inc. is pleased to announce the development of HAYNES® HR-224® alloy, a new alloy with excellent oxidation resistance and improved fabricability and weldability compared to HAYNES® 214® alloy. T...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® HR-235® alloy

    HAYNES® HR-235® alloy is a nickel-chromium-molybdenum-copper material with outstanding resistance to metal dusting. It has no deliberate addition of iron, an element which is detrimental to the performance of alloys un...

    VIEW POST
  • 13 / 02 / 2020

    MULTIMET® alloy

    MULTIMET® alloy (UNS R30155, W73155) is recommended for us in applications involving high stress at temperatures up to 1500°F, and moderate stress up to 2000°F. It has excellent oxidation resistance, good ductility, a...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® NS-163® alloy

    HAYNES® NS-163® alloy is a wrought cobalt-based alloy (Co–28Cr–21Fe–9Ni–1.25Ti–1Nb) for use in sheet and wire forms. Not only is this alloy fully fabricable and weldable, it achieves a level of stress-rupture...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® R-41 alloy

    Vacuum-melted, nickel-based HAYNES® R-41 (UNS N07041) alloy has exceptionally high strength at temperatures in the range of 1200 to 1800°F (649 to 982°C). The alloy is a precipitation-hardening type and strength is de...

    VIEW POST
  • 13 / 02 / 2020

    HASTELLOY® S alloy

    HASTELLOY® S (UNS N06635) is a nickel-base, high-temperature alloy with a unique combination of properties. It has excellent thermal stability, low thermal expansion and excellent oxidation resistance to 2000 °F (1093 ...

    VIEW POST
  • 13 / 02 / 2020

    HASTELLOY® W alloy

    HASTELLOY® W alloy (UNS N10004) is a solid-solution-strengthened super alloy that was developed primarily as a filler metal for welding of dissimilar alloys. It displays excellent dissimilar welding characteristics, and...

    VIEW POST
  • 13 / 02 / 2020

    HAYNES® Waspaloy alloy

    HAYNES® Waspaloy alloy (UNS N07001) is an age-hardenable, nickel-based superalloy with very good strength at temperatures up to about 1800°F (980°C). It is widely used as a wrought material for forged and fabricated g...

    VIEW POST
  • 13 / 02 / 2020

    HASTELLOY® X-750 alloy

    HAYNES® X-750 (UNS N07750) alloy is an age-hardenable, nickel-base superalloy with a very good strength at temperatures up to about 1600°F (870°C). It is widely used as a wrought material for forged and fabricated par...

    VIEW POST
  • 09 / 02 / 2020

    HASTELLOY® C-4 alloy

    A versatile Ni-Cr-Mo alloy with extremely high resistance to HAZ sensitization....

    VIEW POST

“I can rely on them to take the trouble to help us out which means that I can then deliver to my customers the solutions that they are looking for. Specialty Metals enable us to do our job.”

- Delivering Solutions
Specialty Metals

Specialty Metals